IMPORTANT INFORMATION
A
The unit must only be installed by trained personnel.
A
Observe automotive industry quality standards and the relevant local statutory regulations.
A
Fire hazard: when drilling, take care not to damage concealed wiring harnesses, the fuel tank
or fuel lines.
A
Never drill into supporting or safety-relevant body parts.
It is essential to observe the following when installing components in the passenger
compartment:
A
Ensure that the driver has a clear all-round view.
A
Increased risk of injury in the event of an accident. Do not install components in the inflation
range of the airbag or in areas where the head may knock against them.
A
Only install the unit in vehicles with a 12-V on-board voltage; connect negative pole to earth.
Installation in unsuitable vehicles (e. g. heavy goods vehicles, buses) results in a risk of malfunction,
damage and fire.
A
Do not damage safety system wiring (airbag etc.). (Lines are normally specially marked, for
example by labels).
A
Do not use test lamps to test the voltage, since excessively high currents could damage/
destroy electronic components.
A
Do not use any pinch or cut connectors. Solder all wiring connections. Insulate all solder points
with shrink hose or insulating tape.
A
Fit toothed washers at earth connections to the vehicle body. If necessary, remove paint and
dirt beforehand. Subsequently, protect bare metal against corrosion.
A
In order to ensure perfect installation, use only the original components supplied. The use of
non-authorised components may result in malfunction.
A
Do not install the unit in positions where it is exposed to high temperatures, dust, dirt or
excessive vibration (e.g. due to direct sunlight or heating vents).
Scope of delivery
Check the scope of delivery for completeness before starting work. The complete installation
kit contains:
1
MM 2700 with 5 m connecting cable
1
Installation bracket for headrest integ 1 disassembly tool
1
Infrared remote control
1
Stereo headphone (3.5-mm jack)
1
Installation and operating instructions
Report faulty components to the Service department and notify any damage to the deliverer
(forwarder, package service, post office).
Technical data, design and scope of delivery may vary slightly due to product updating.
INSTALLATION INSTRUCTIONS
7
English
