VDO MM 2700, Owner'S Manual

Page: 5 / 10

Operation
Switching on / off
☞
Press the
O
key on the monitor or on the remote control to switch the monitor on or off.
✎
The green LED on the monitor indicates operational readiness.
✎
If no video signal is available at the monitor, “NO SIGNAL” flashes in the display.
Volume setting
On the monitor:
☞
Press the
8
or
2
key to set the desired volume on the built-in loudspeaker.
With the remote control:
☞
Press the VOL+ or VOL– key to set the desired volume on the built-in loudspeaker.
OSD menu
■
Calling up the OSD menu
☞
Press the MENU key on the monitor or on the remote control once or several times to call
up the desired menu item.
■ Adjusting settings
☞
Press the
8
or
2
button on the monitor to increase or reduce the set value.
Or:
☞
Press the VOL+ or VOL– button on the remote control to increase or reduce the set value.
The following settings can be made by selecting the respective menu items:
❏
BRIGHT : Sets the brightness
❏
CONTRAST : Sets the display contrast.
❏
COLOR : Sets the colour saturation.
❏
TINT : Sets the hue (with NTSC signal only).
❏
DIMMER : Switches the display brightness for day/night settings.
❏
MIRROR : Mirrors the display contents on the vertical axis
(useful, for instance, if a reversing camera is connected).
❏
UP/DOWN : Mirrors the display contents on the horizontal axis
(if the monitor is installed overhead).
❏
DEFAULT : Resets all settings to the factory values.
OPERATION
6