VDO DTCO 4.1, Instruction Manual

Page: 43 / 172

4
Inserting card Operation (general)
© Continental Automotive Technologies GmbH
43
IMPORTANT
Selection of the card drawer
• Card drawer 1 (left card drawer) for
the card of the person driving the
vehicle.
• For crew operation: Card drawer 2
(right drawer) for the card of the ac-
companying driver.
• For the company card: Freely select-
able card drawer.
IMPORTANT
For operating the ADR variant, the igni-
tion must be switched on.
Please observe the special safety notes
for the operation of the ADR variant of
the DTCO 4.1 in explosive environ-
ments.
è
ADR version (Ex version) [
}
23]
1. Keep the combination button driver 1
or driver 2 pressed for more than
2 seconds.
 123456.7km 
13:02  0km/h
Fig. 8: Request card (combination button)
2. The card drawer comes out. Carefully
fold down the card drawer cover.
13:02  0km/h
  card! 
Fig. 9: Fold down the cover
3. Insert your card – chip up and arrow
facing forward – into the card drawer.
13:02  0km/h
  card! 
Fig. 10: Inserting card
4. Carefully fold up the card drawer
cover.
5. Push the card drawer into the card
drawer until it engages. The informa-
tion on the chip is read.
While a card is being read in
card drawer 1, another card can be
inserted into card drawer 2:
• Crew operation: the driver card of
the second, accompanying driver.
• Reading the card and mass
memory data: the company card.
Depending on the card inserted, menu-
driven operation steps are carried out.