VDO DTCO 4.1, Instruction Manual

Page: 55 / 172

5
Setting activities Operation by the driver
© Continental Automotive Technologies GmbH
55
■ Setting activities
► Possible activities
The following activities can be set:

Driving time (automatic when
driving)

All other working times

Availability (waiting times, co-
driver time, driver 2 sleeper-
cab time during the journey)

Breaks and rest times
► Changing activities
IMPORTANT
Setting the activities is only possible
when the vehicle is stationary.
a. Press the combination button for
driver 1.
The standard display is shown.
12:40  0km/h
 100436.8km 
Fig. 27: Standard display with activity (1)
b. Press the combination button until
the required activity appears in the
display
(1) .
c. In crew operation: As co-driver
(driver 2), press button .
► Automatic setting
The DTCO 4.1 switches automatically to
the following activities:
for ... Driver -1 Driver -2
Journey
 
Vehicle stop
 
IMPORTANT
Ensure the correct calculation of the
VDO Counter (option):
• It is essential that you set activity

at the end of a shift or break.
Automatic setting after ignition on/
off (default))
After ignition on/off, the DTCO 4.1 can
switch to a defined activity; for example

.
This activity can be programmed with a
company card or by an authorised spe-
cialist workshop.
The activity (1) and/or (2) , which auto-
matically changes due to ignition on or
ignition off, is shown in the standard dis-
play. It flashes for around 5 seconds.
18:01  0km/h
 123456.7km 
Fig. 28: Flashing of the activity in the standard
display
After ignition on, the previous display re-
appears.