VDO DTCO 4.1, Instruction Manual

Page: 23 / 172

3
Stand-by mode (display) Device description
© Continental Automotive Technologies GmbH
23
Entry of the registration number
Entry of the registration number and the
authorising member state can also be
carried out via an app:
www.fleet.vdo.com.
■ Stand-by mode (display)
In the operating mode “operational” , re-
cognisable in the display by the picto-
gram

, the DTCO 4.1 switches to
Stand-by mode in the following circum-
stances:
• Vehicle's ignition is off.
• No message is pending.
If “I gnition off ”, the display is dimmed.
After approx. 1 minute (customer-specific
value), the display goes out completely –
the DTCO 4.1 is in stand-by-mode.
A further dimming value can optionally
be set (workshop).
► Exiting stand-by mode
By pressing any button, ignition on or the
end of interruption the stand-by mode is
exited.
The display lights up again; no further
action occurs.
■ ADR version (Ex version)
The ADR variant of the DTCO 4.1 is
marked with an ex symbol on the front
plate.
Fig. 2: Ex symbol on the front side
The ADR variant of the DTCO 4.1 is ap-
proved for use in explosive environ-
ments.
• Ex zone: Zone II
• Ambient temperature:
-20 °C to +65 °C