For your safety
Fitting instructions
5
• Edition 01/2
009
Fitting instructions
Power supply
The Roller Interface Module may only be connected to the voltages stipulated
in this Installation Manual; see
Chapter entitled “Technical data”
on
Page 34
.
Connection cables
When laying the cables, make sure that no one can stumble over them and
that no damage to the cables can be caused by other objects or by the effects
of heat.
Accessories
No modifications to accessories may be made (EMC regulations). Never use
accessories which have not been recommended by the manufacturer – they
can cause accidents and operational disruptions.
Notes on the sealing of the Roller Interface Module
If sealing is required, the following sealing may be carried out for the Roller
Interface Module:
•
Sealing of the housing cover.
The power supply installation must be carried out by an electrician.
◄
Important
Danger of short-circuits!
Damaged cables can cause short-circuits, adverse effects and malfunctions.
Replace damaged cables immediately!
◄
Caution
The use of non-authorised accessories invalidates the CE certificate of
conformity!
◄
Important
Always adhere to your country's valid legal regulations!
◄
Important
