Product overview
Connection overview
8
• Edition 01/2
009
Package contents
•
The connection cables for the roller sensor and the light barrier are
20 m
in length
.
•
Communication between the CTC II and the Roller Interface Module
takes place via Bluetooth (wireless).
•
The power connection is not fixed to the device (not supplied).
11
Light barrier (screw connection)
12
Hardware prescaler; see the
Chapter entitled “Hardware prescaler SW1”
on
Page 19
13
Light barrier connection; see the
Chapter entitled “Connection J4 – Light barrier”
on
Page 15
14
Optional trailing cable interface; see the
Chapter entitled “Connection J13 –
Trailing cable interface (optional)”
on
Page 16
The power supply installation must be carried out by an electrician.
◄
Important
Danger of short-circuits!
No protective earth conductor is connected to the magnet valve of the lifting
bar.
The protective earth conductor must be externally connected to the double
roller set. Ensure that earthing is sufficient (cross-section at least 6 mm
2
).
◄
Caution
