Installing the Roller Interface Module
Installing connections
11
• Edition 01/2
009
Installing the Roller Interface Module
Installing connections
When choosing a location to mount the Roller Interface Module, please note
the following:
•
The ideal environmental temperature is b0 °C and +40 °C.
•
The power supply installation must be carried out by an electrician.
◄
Condition
Check the supply voltage before connecting and commissioning the Roller
Interface Module.
The system is factory-set at an input voltage of 100 to 240 V.
◄
Caution
1
1
Loosen screw connection (1).
2
Push the end of the cable through the union nut, the washer and the cable
assembly into the housing interior.
3
Connect the wires as described in the connection diagram.
4
Tighten screw connection (1) and secure the cable.
