background image

1. POWER
Press this key to turn “on” or “off”, and the relating 

indicating light may follow the instruction to 

illuminate or extinguish. (While the unit is defrost-

ing, the indicating light may lights on and off in 

turn shortly.)
2. FAN SPEED
Press the key to choose high speed (HI) or low 

speed (LOW), and the relating indicating light may 

follow the instruction to illuminate or extinguish.
3. TIMER
a. Press the key to set time you need. (1 to 24 

hours)
b. When setting timer in stand-by mode, the unit 

will be turned on automatically; when setting timer 

in operating mode, the unit will be turned off 

automatically.
c. If pressing the power key to turn off the unit 

before time finishes counting down, the setting 

timer will be canceled.
d. While the timer is in used, the indicating light 

illuminates; if not, then the indicating light 

extinguishes.
e. After set the timer 5 seconds, the display may 

switch back to show the ambient humidity.(Press 

once again can show the turning-off time.)
4. HUMIDITY SETTING
Press the key to set the relative humidity you need. 

(From continuous dehumidification [CO] to relative 

humidity 50%, 60%, 70%, 80%, comfort mode [AU], 

and back to continuous dehumidification [CO]. The 

first time you electrify the unit, the unit is set to be 

continuous dehumidification [CO].

When ambient humidity is lower than setting humidi-

ty by 3%, compressor will stop automatically, and 

return working until the ambient humidity is higher 

than setting humidity by 3%.
COMFORT MODE [AU]
a. When ambient temperature is lower than 5°C, 

compressor will stop working.
b. When ambient temperature is higher than 5°C and 

lower than 20°C, the product will set the humidity to 

60% automatically.
c. When ambient temperature is higher than 20°C and 

lower than 27°C, the product will set the humidity to 

55% automatically.
d. When ambient temperature is higher than 27°C, the 

product will set the humidity to 50% automatically.
WATER FULL
When the water tank is full, the indicating light will 

illuminate and the unit will stop working until empty 

the water tank.
DEFROST
When the unit is defrosting, the indicating light will 

illuminate and the compressor will stop working but 

the motor will keep operating.
WARNING
1. When operating the dehumidifier, please do not set 

the humidity higher than ambient humidity.
2. When indicating light illuminates, please pour the 

water out of the tank and put it back. Then the 

product will resume working.
3. When the product shut down, please wait at least 3 

minutes before restarting the unit to prevent damag-

ing the compressor.

CONTROL PANEL DESCRIPTION 

OPERATING INSTRUCTION

2

EN

Ref. 636134

DEHUMIDIFIER

DESHUMIFICADOR

Summary of Contents for 636134

















Reviews: