VCS VideoJet 8000, User Manual

Page: 125 / 148

Chapter 6 Operation
VideoJet 8000 125
Connecting with a terminal program
Various requirements must be met in order to operate using a terminal program
(see page 23).
– Start the terminal program. Enter the command
i
in the main menu to switch
to the IP menu.
– Enter the command
r
in the IP menu to change the remote IP address, then
enter the IP address of the device to connect to.
– Enter the command
a
in the IP menu to activate automatic connection.
Connecting with a Web browser
Various requirements must be met in order to operate using a Web program (see
page 27).
– Use the Web browser to connect to the receiver. Its home page will be
displayed.
– Select a transmitter from the Available sender units list. A JPEG snapshot of
the video source selected will be displayed on the page.
– Click Connect to begin showing the video images on the connected monitor.