VCS VideoJet 8000, User Manual

Page: 114 / 148

Operation Chapter 6
114 VideoJet 8000
Establishing the connection
The VideoJet 8000 must be provided with a valid IP address to operate on your
network.
The following default address has been pre-set at the factory: 192.168.0.1
– Start the Web browser.
– Enter the IP address of the VideoJet 8000 as the URL. The connection will be
established, and after a short time the Livepage with the video image will
appear.
Note
If the connection cannot be established, this may be because the unit
selected is already busy with another remote station. Depending upon the
network configuration and the individual units, a transmitter can serve up to
five receivers at the same time.