manualshive.com logo in svg

VCA sound SMART RLT Sport, User Manual

Share
Download
VCA sound SMART RLT Sport User Manual Download Page 7

 

UM0000001 Rev_0 (2019/11/25)                   

Page 

7

 of 

36

           Copyright 2019 Sound Technologies

 

 

5810 Van Allen Way, Carlsbad CA 92008 

800.268.5354  |  soundvet.com 

treatment area. Release the finger -switch to deactivate the laser. Depending on laser system 
configuration, the finger-switch can function as on/off switch. A convenient and easy-to-use touch-
screen design allows the operator to set and adjust laser output level with minimal effort. The laser 
can operate at controlled pulse mode. The device features selection of treatment areas that when 
selected bring up presets for treatment parameters which include: energy, Hertz (frequency), dose, 
and calculate the time necessary to perform the treatment.  

 

5.2

 

Protective Eyewear 

All Individuals present during the operation of this device must wear protective eyewear with an 
optical density of 5.0 or greater at 1064nm wavelength. Three (3) pairs are included with this device.  
 
For additional pairs of protective eyewear, contact Sound Technologies, Inc. at 800-268-5354 Option 
1.  

5.3

 

Environmental Safety 

The laser system must be stored, transported and operated in accordance with the environmental 
conditions provided in this manual. 
 
The laser device is air-cooled and designed for use in a well-ventilated area that maintains relative 
humidity and temperature conditions conducive to conventional human productivity.  
 
This laser device has specific requirements for environmental conditions for transportation, storage 
and operation. 
 

Temperature Humidity and Air Pressure  

Condition 

Temperature 

Humidity 

Air Pressure 

Transportation 

and storage 

 -5-

45⁰C (23

-

113⁰F)

 

10-95% non-

condensing 

700 hPA-1060-hPA 

(10-.5 lb/in2, 0.7-1.0 

atm) 

Operation 

10-

32⁰C (50

-

90⁰F)

 

30-75% non-

condensing 

700 hPA-1060-hPA 

(10-.5 lb/in2, 0.7-1.0 

atm) 

 
 

6

 

SAFETY 

This section provides a collection of safety guidelines and safety-related statements relevant to the 
safe and effective operation of the SMART RLT Sport system. Additional statement and protocols 
regarding safety appear elsewhere in this document. Use this laser device according to all printed 
guidelines, cautionary statements, and protocols. 
 

Summary of Contents for sound SMART RLT Sport





































Reviews:

No comments

Brands by name

Popular brands

Load more brands