UM0000001 Rev_0 (2019/11/25)
Page
4
of
36
Copyright 2019 Sound Technologies
5810 Van Allen Way, Carlsbad CA 92008
800.268.5354 | soundvet.com
1
CONVENTIONS USED
Various precautions, warnings, recommendations and notes are presented throughout this document.
Explanations of the categories are as follows:
CAUTION!
A
PRECAUTION
describes measures that if properly followed beforehand, will prevent
harm.
WARNING!
A
WARNING
calls the reader’s attention to specific danger in advance. If ignored or
compromised, the situation could result in serious, irreversible personal injury or product damage.
RECOMMENDATION
: A
RECOMMENDATION
offers guidance that may be worthy of
acceptance or trial within a specific area of SMART RLT Sport’s application and may serve to
optimize overall SMART RLT Sport utilization.
NOTE
: A
NOTE
describes the conditions or exceptions that may apply to the subject matter
presented.
2
PRECAUTIONS
•
Never allow untrained personnel to operate this device unless directly supervised by a properly
trained and experienced individual.
•
The protective eyewear supplied with this device has an optical density rating >5 in the 1064
nm region.
All
personnel present during device operation must wear this eyewear. Contact
Sound Technologies, Inc. at 800-268-5354 Option 1 to purchase additional sets of protective
eyewear for this device.
•
Select a secure, properly equipped, and well-ventilated location in which to install and operate
the laser.
•
Place “Laser Safety Warning” signs at location entrances where people will use the SMART
RLT Sport laser device.
•
Always put the laser in Standby mode or switch the device off prior to adjusting or preparing
the hand piece or fiber optic.
•
Never leave this device in the
READY
mode unattended. See the STANDBY to READY
Mode in the Operations section of this manual.
•
Log off the laser when not in use to prevent unauthorized and/or unqualified use of the device
as well as inadvertent laser emissions.
