VBrick Systems ETHERNETV 4410-0118-0009 Admin Manual Download Page 88

Page: 88 / 202

Zone Name

User-defined string that identifies the zone.

Client Address(es)

Enter individual, comma-separated client

IP addresses and/or a

range of client IP addresses. For example:

172.15.2.1

172.16.2.1-172.22.2.255

Server Address(es)

Enter individual, comma-separated server

IP addresses and/or a

range of server IP addresses to which the specified client(s) will
be directed.

Save Zone

Saves the zone information in the upper panel.

Default Server
Address(es)

The server address to which a client is directed if the client IP
address is not included in the

Client Address(es)

field.

Save Default Address(es) Saves the default server information in the lower panel.

Note VBPresenter Only.

If no zones are configured (the default), then all live and stored

content (including VBPresenter presentations) will be visible in the Portal Server.
However, if you do configure zones, then all content will be filtered based on the
defined

Server Address(es)

. For VBPresenter Presentations hosted on the Portal

Server, zones must be configured to include the users' appropriate Portal Server IP
Address.

Summary of Contents for ETHERNETV 4410-0118-0009











































































































































































































Search results

Summary of Contents for ETHERNETV 4410-0118-0009

Reviews:

Brands by name

Popular brands

VBrick Systems ETHERNETV 4410-0118-0009, Admin Manual

Search results

Summary of Contents for ETHERNETV 4410-0118-0009

Reviews:

Brands by name

Popular brands