manualshive.com logo in svg

VBrick Systems ETHERNETV 4410-0118-0009, Admin Manual

Share
Download
VBrick Systems ETHERNETV 4410-0118-0009 Admin Manual Download Page 14

2

© 2009 VBrick Systems, Inc.

navigate or search for specific videos, select the video, and immediately begin viewing DVD 
quality video. For on-demand videos, users can 

Fast Forward/Rewind

 and 

Seek

 to specific 

points in the video. Standard access control functionality provides restriction of certain 
content to particular users, user groups, or IP receivers. An optional scheduling module 
allows users to schedule devices to send video, receive video, record video, or to initiate a 
two-way conference.

Server Requirements

The 

minimum

 server requirements include:

•

Windows Server 2003 (Web Edition or Standard Edition with Service Pack 2).

•

Pentium IV or Xeon Processor 1.26 GHz Minimum (2 GHz or higher recommended). 

•

RAM 512 MB Minimum (1 GB or more recommended).

•

Hard Drive 36 GB Minimum (larger for frequent recording).

Desktop Requirements

Windows-based PC and Macintosh users access the ETV Portal Server through a web 
browser. For Windows-based PCs, on the first access to the server, VBrick StreamPlayer 
software is automatically downloaded to the PC. StreamPlayer software lets end users select a 
stream and view TV-quality video directly on a PC. Macintosh users view MPEG-4 video 
through the QuickTime player.

Table 1.  

Desktop Requirements

Note

VBrick has tested the ETV Portal Server on Windows 2003 Server Web Edition and 
Standard Edition. Note also that ETV Portal Server also will not operate correctly on 
a server that is configured as a primary domain controller or with other network-
related services and software.

PC Type

Requirements

Windows PCs

• Windows 2000, XP (Service Pack 3), or Vista.
• 750 MHz Pentium III processor (Pentium IV required for H.264).
• 512 MB RAM (1 GB recommended for H.264).
• SVGA video card 1024x768, video card acceleration and 32 bit color 

recommended.

• Minimum 250 MB hard disk space for installation.
• Microsoft Internet Explorer 6.0 or higher.
• Microsoft Windows Media Player 9.0 or higher.
• Firefox  2.0  or  higher.
• DirectX Media Version 8.1 and higher. 

Macintosh PCs

• Mac OS X 10.3 or higher for PowerPC.
• Mac OS X 10.4 or higher for Intel-based PC.
• Firefox for Macintosh 2.0 or higher.
• QuickTime Player 6.0 or higher.
• Internet Explorer on a Macintosh is not supported.

Linux PCs

• Red Hat Fedora 9.1
• Firefox  2.0.
• 512 MB RAM.

Summary of Contents for ETHERNETV 4410-0118-0009











































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands