manualshive.com logo in svg

VBrick Systems ETHERNETV 4410-0118-0009, Admin Manual

The Admin Manual for the VBrick Systems ETHERNETV 4410-0118-0009 is available for free download from manualshive.com. This comprehensive manual provides users with detailed instructions and information about the product, ensuring smooth operation and maximum utilization of its features. Get your copy today and unlock the full potential of your VBrick system.

Share
Download
background image

8

© 2009 VBrick Systems, Inc.

on all servers both inside and outside the firewall. To summarize, 

Internet-based

 servers and 

users are subject to the following limitations:

•

Internet servers support MPEG-4 and Windows Media content only.

•

Internet servers support unicast only (they do not support multicast).

•

Internet ETV users can add video only to VOD servers in the Internet zone.

•

Internet users can only see MPEG-4 and Windows Media content stored on Internet-
based servers.

•

Internet servers do not support ETV scheduling features.

ETV IP Receiver

EtherneTV-IPRs access the ETV Portal Server through a web browser within the IP 
Receiver. Using the IP Receiver remote control, users can navigate and search for specific on-
demand content or live video streams, select a stream, and begin viewing television-quality 
video. IP Receiver users can also record video directly on the ETV Portal Server using the 
remote control or the wireless keyboard. See the IP Receiver documentation for more about 
how to configure and use an ETV IP Receiver.

ETV Network Video Recorder

The ETV Network Video Recorder and the ETV Live Portal Server are optional components 
that are purchased and installed separately. They have different license files that must be 
installed separately. See Installing Serial Numbers and License Files on page 15. The ETV 
Network Video Recorder lets you off-load all recording tasks from the ETV Portal Server 
machine to one or more separate "recorder server" machines. This optimizes recording 
performance and improves ETV Portal Server performance as well. The Network Video 
Recorder uses ETV 

Portal Server components and typically requires two machines: the ETV Portal Server is 
installed on one machine; the Network Video Recorder software is installed on a different 
machine. Once installed, the NVR machine is used for all ETV Portal Server recording tasks. 
See Network Video Recording on page 127 for more information.

Note

A standard ETV Portal Server permits two concurrent recording operations. If you 
purchase a Network Video Recorder, the number of concurrent recording operations 
(10 or 40) is fixed by the terms of your licensing agreement with VBrick.

Summary of Contents for ETHERNETV 4410-0118-0009











































































































































































































Reviews:

No comments

Related manuals for ETHERNETV 4410-0118-0009

Surveon EonServ 5000 Series User Manual preview
EonServ 5000 Series
Brand: Surveon Pages: 33
H3C UniServer R6900 G5 Installation, Quick Start preview
UniServer R6900 G5
Brand: H3C Pages: 17
TYAN FT77B-B7059 Service Engineer'S Manual preview
FT77B-B7059
Brand: TYAN Pages: 170
Jatheon PnC 100 Installation & Administrators Manual preview
PnC 100
Brand: Jatheon Pages: 52
Raidon ST7610-4S-S2 User Manual preview
ST7610-4S-S2
Brand: Raidon Pages: 20
Intergraph InterServe 600 Series System Reference Manual preview
InterServe 600 Series
Brand: Intergraph Pages: 104
Avaya callpilot 1002rp Maintenance And Diagnostics preview
callpilot 1002rp
Brand: Avaya Pages: 150
Sun Microsystems Ultra Enterprise 3000 Installation Manual preview
Ultra Enterprise 3000
Brand: Sun Microsystems Pages: 48
Digi 70002405 User Manual preview
70002405
Brand: Digi Pages: 163
Supero SUPERSERVER 6113L-8 User Manual preview
SUPERSERVER 6113L-8
Brand: Supero Pages: 104
Supero SUPERSERVER 6017R-NTF User Manual preview
SUPERSERVER 6017R-NTF
Brand: Supero Pages: 126
Supero SuperServer 5017R-MF User Manual preview
SuperServer 5017R-MF
Brand: Supero Pages: 106
Supero SUPERSERVER 5015A-EHF User Manual preview
SUPERSERVER 5015A-EHF
Brand: Supero Pages: 106
Supero SuperServer 5013S-8 User Manual preview
SuperServer 5013S-8
Brand: Supero Pages: 110
Supero Supero SUPERSERVER 5015B-NT User Manual preview
Supero SUPERSERVER 5015B-NT
Brand: Supero Pages: 98
Supero 4042G-72RF4 User Manual preview
4042G-72RF4
Brand: Supero Pages: 122
Supero 2022TC-BIBQRF User Manual preview
2022TC-BIBQRF
Brand: Supero Pages: 121
Supermicro SuperStorage L-Serie Quick Reference Manual preview
SuperStorage L-Serie
Brand: Supermicro Pages: 1

Brands by name

Popular brands

Load more brands