manualshive.com logo in svg

VBrick Systems ETHERNETV 4410-0118-0009, Admin Manual

The Admin Manual for the VBrick Systems ETHERNETV 4410-0118-0009 is available for free download from manualshive.com. This comprehensive manual provides users with detailed instructions and information about the product, ensuring smooth operation and maximum utilization of its features. Get your copy today and unlock the full potential of your VBrick system.

Share
Download
background image

NXG-to-VOD-W Content Migration

ETV Portal Server Admin Guide

175

Recovering from Migration Errors

Migration errors are shown in the 

Status

 column. Once started, the migration will continue 

until each ingestion reports either success or failure. If you stop the migration, all queued 
ingestions are removed (click yes on the popup) from the Portal Server and you can correct 
the errors and restart the migration when ready.

If you ignore the popup window (click no on the popup), you will have to either remove 
queued ingestions manually from the Portal Server or wait until all ingestions are complete 
with either failure or success. Then you can fix the errors and restart. You may see duplicate 
asset file errors in the migration 

Status

 column. These errors indicate that the asset already 

exists on VOD-W and the Portal Server and can be safely ignored.

Verifying the Migration

Use the 

Save to File

 (XML) option to create a 

status.xml

 file which lists the video files that 

failed to ingest. If some files fail to ingest during migration, you can point to this file in the 

Assets

 field and repeat the migration.

Assets

Filter

Optional. Enter an alphabetic substring to search for matching files 
and click 

Apply

.

File Names

Select the video files to be migrated from the complete list of files in 
the asset list. Use 

Check All

, 

Uncheck All

, or 

Delete Selected

 as 

appropriate. Note that 

Delete Selected

 works with selected (i.e. 

highlighted) files and 

not

 checked files.

Schedule

Start On

Start date. Default = unchecked. The tool will migrate files every day 
beginning at the specified hour.

From/To

The migration will run during the specified time period.

Save to File

This option saves a 

status.xm

l file that shows migration results. If 

some files fail to ingest during migration, you can point to this file in 
the 

Assets

 field and repeat the migration.

• Comma – save the status file as comma separated values. This can 

be displayed in a spreadsheet or an editor.

• XML – save status file as an .xml file. This file is identical in 

format to the asset list (see Sample Asset List) and can be used to 
repeat the migration.

Start/Stop

Start a migration; stop a migration currently in progress. You may 
want to stop the migration and correct a problem if multiple failures 
are shown in the Status column. See Recovering from Migration 
Errors below.

Summary of Contents for ETHERNETV 4410-0118-0009











































































































































































































Reviews:

No comments

Related manuals for ETHERNETV 4410-0118-0009

IBM LS42 - BladeCenter - 7902 Service Manual preview
LS42 - BladeCenter - 7902
Brand: IBM Pages: 194
Lantronix SLC8 Manager User Manual preview
SLC8
Brand: Lantronix Pages: 299
Omneon MediaDeck Installation Manual preview
MediaDeck
Brand: Omneon Pages: 2
NEC EXP339 User Manual preview
EXP339
Brand: NEC Pages: 128
IBM 419452u - Servers System X3250 M2 Xeon... Installation Manual preview
419452u - Servers System X3250 M2 Xeon...
Brand: IBM Pages: 84
Kyocera Printserver Installation Manual preview
Printserver
Brand: Kyocera Pages: 207
Sun Microsystems iPlanet Web Server Installation Manual preview
iPlanet Web Server
Brand: Sun Microsystems Pages: 62
Digi PortServer/16 User Manual preview
PortServer/16
Brand: Digi Pages: 118
TRENDnet TEW-P1P Quick Installation Manual preview
TEW-P1P
Brand: TRENDnet Pages: 9
Simpact Freeway 2000 Hardware Installation Manual preview
Freeway 2000
Brand: Simpact Pages: 86
High End Systems CATALYST DV User Manual preview
CATALYST DV
Brand: High End Systems Pages: 224
Supermicro SUPERO H8DGT-H User Manual preview
SUPERO H8DGT-H
Brand: Supermicro Pages: 70
Supermicro Supero H8DM3-2 User Manual preview
Supero H8DM3-2
Brand: Supermicro Pages: 78
Supermicro H8DGU-LN4F+ User Manual preview
H8DGU-LN4F+
Brand: Supermicro Pages: 82
Red Hat DIRECTORY SERVER 7.1 SP7 - S Release Note preview
DIRECTORY SERVER 7.1 SP7 - S
Brand: Red Hat Pages: 12
TAG HDIT 2U Reference Manual preview
HDIT 2U
Brand: TAG Pages: 6
CTC Union DVS-8301 User Manual preview
DVS-8301
Brand: CTC Union Pages: 53
SAFARI RM-126X Installation Manual preview
RM-126X
Brand: SAFARI Pages: 28

Brands by name

Popular brands

Load more brands