manualshive.com logo in svg

VBrick Systems ETHERNETV 4410-0118-0009, Admin Manual

Share
Download
VBrick Systems ETHERNETV 4410-0118-0009 Admin Manual Download Page 147

VBPresenter

ETV Portal Server Admin Guide

135

Presentations

 directory is a virtual directory in IIS. This directory is the root folder for live 

presentations only.) There is an 

MCS

 directory at the FTP root directory. Note that the entries 

made in the Admin console are stored in the Portal Server and do not actually configure IIS. 
These values must reflect what IIS has been configured for.

Configuring an MCS Presentation User

Perform the following configuration 

one time only

 so that the presentation tool you are using 

can access the Portal Server. These steps will create a pseudo VBPresenter user who is 
associated with the authoring tool and has specific permissions on the Portal Server.

T

To create a presentation user

1. Open the Admin Console and go to 

Users

.

2. Add a user name (for example 

PresentationUser

) and give this user the following 

permissions:
a.

Add/Modify Live Channel Privileges

 – check the appropriate channels.

b.

Add/Modify Live Programs Privileges

 – check the appropriate programs.

a.

Allow Access to Specific VOD Servers

 – check the appropriate servers.

b.

Allow Access to Specific VOD Content

 – check the appropriate folders.

c.

Allow Content Publishing

 – check the appropriate folders.

3. Go to 

Global Settings > Global Assignments > Assign Presentations

 and select the user 

you created above (for example 

PresentationUser

) as the 

New Presentation User

.

Configuring for Live Presentations

You must perform the following steps to configure the Portal Server for 

each

 live 

presentation.

T

To configure the Portal Server for a live presentation

1. Go to 

Global Settings > Program Names

 and add a program name (for example 

Live 

Presentation

). Then use this same name in the 

MCS Program Name

 field in VBPresenter. 

This is the title that will be displayed on the 

Live Broadcasts

 page during a live 

presentation.

2. If necessary, give your end users access to this live presentation. Go to 

Users > Add/

Modify Live Channel Privileges 

and select this 

Program Name

.

Note

The MCS setup program creates an additional user name and password with an FTP 
Home directory in the 

Live Presentations

 folder on the MCS server. This User 

Name (

Presentations

) and password (

Presentations

) are used in the 

FTP/Web 

Server

 section of the VBPresenter Setup window.

Hint

To pre-configure a presentation, create a 

Program Name

 in advance on the Portal 

Server and assign 

Live Channel

 

Privileges

 to users. Then use the same name in the 

MCS Program Name

 field in VBPresenter when giving the presentation. The 

MCS 

Program Name

 will be available on the 

Live Broadcasts

 page for any users who have 

permissions to view that channel

Summary of Contents for ETHERNETV 4410-0118-0009











































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands