VBox V@Home TV Gateway User Manual
5
. Setting up XTi-VBox TV Gateway using the Web Interface
5.3
. Step 3 – Scan
27
Table 11 explains the
Scan Status
and
Scan Results
.
Table 11: Quick Setup Wizard – Step 3 –Scan: Scan Status and Scan Results page (XTi-334X/5X)
Option
Description
Scan Status
Inidates that the scan has been completed as follows:
DVBS2-Tuner 1,2
– shows the
Satellite
that was scanned for
Tuner 1 and Tuner 2, and specifies the number and percentage
of tranpsonders that were scanned for this satellite.
DVBT-Tuner 3, 4
– shows the
Country
that was scanned for
Tuner 3 and Tuner 4, and specifies the number and percentage
of channels that were scanned for this country.
Rescan
Repeats the scan operation.
Scan Results
Provide details on each transponder and satellite that was scanned:
Tuner 1,2
– reports the scan
Status
of each transponder you
selected:
Available
or
Unavailable
.
Tuner 3, 4
– reports the scan
Status
of each channel you
selected:
Locked
or
Could Not Lock
.
4.
Choose one of the following:
To repeat the scan (for example, if you wish to choose different transponders or channels),
click
Rescan
.
To complete your Scan setup, click
Next
.
These settings complete
Step 3-Scan