16
Recommended
Torque Values
Ensure all cables and connectors at the front of the bike are securely connected,
otherwise certain components may not work accurately such as the front and rear light, the motor
inhibitor switches, LCD display, and throttle. The motor inhibitor switches shut the motor off as soon
as the rider hits the brakes.
If these switches do not operate precisely, it will take longer to slow down which in
some riding situations could cause injury or death to the rider, so you need to check all cable and
connectors regularly.
It is recommended that fasteners be tightened to the manufacturer's specification found below:
To adjust the angle of your seat, first loosen the nuts on both sides of the seat, then move the seat
to the desired angle and after that tighten the nuts. You can see the nuts in the picture.
Part
Required Torque (N*m)
Hub
35-44
Reflector
4-5
6-8
Disc mounting bolts
2-3
Brake Lever
8-10
Rear Derailleur
15-17
Seatpost
18-19
Saddle
35
Pedals
38-44
Bottom Bracket Parts
30-34
Headset Parts
5-6
Stem
4
Handlebars
CAUTION
CAUTION
www.vbike.ca
vBike Canada
