manualshive.com logo in svg

Vaz 2113. 2114, Operating Manual, Page: 4 / 52

Share
Download
Vaz 2113. 2114 Operating Manual Download Page 4

4

IMPORTANT NOTICE !

You are now the owner of a comfortable passenger car that is distinguished for its

improved dynamics and speed characteristics. Regardless of your overall driving experience
we recommend you to be particularly careful during the initial period of vehicle operation
until you become familiar with your new Lada.

It is important, that you read this operating manual thoroughly before driving the vehicle.
The vehicle can be used on any type of roads except deeply rutted dirt roads.
The performance and reliability of your vehicle depend to a large extent on its correct use

and timely and thorough execution of servicing operations described in the Service Book.

In case your vehicle needs servicing or repair, we recommend that you take it to your

dealer’s station, which has necessary equipment and tools and can ensure professional stan-
dard of workmanship.

Use materials listed in Appendix #1 while operating or servicing the vehicle. Always

remember that a fuel injection engine with a catalytic converter requires only unleaded
fuel.

Never wash the vehicle with the engine running to avoid water coming into cylinders and thus

damaging the engine.

The design of the vehicle is subject to continuing improvement, therefore, some of the

component parts may differ from the descriptions, provided in the present manual.

RE2115eng  23/04/2002  15:23  Page 4

Summary of Contents for 2113. 2114





















































Reviews:

No comments