Vaxcel T0274 Assembly And Installation Instructions Manual Download Page 6

Page 6 /  10

 

160826

     

TROUBLESHOOTING

7. Select “Custom Settings” in 

    Manual Override for 

    Customize Early Evening

    Mode setting, and choose 

    option between “Duration” or 

    “Clock Time (End Time)” to 

    set the continuous bright light 

    illumination duration. Within 

    “Duration”, you may set from 

     0 to 12 hours for continuous 

     bright light once lamp is 

     activated at night. In “Clock 

     Time (End Time)”, is the time 

     you set to deactivate the 

     continuous bright light 

     according to the actual hour 

     in the mobile device after the 

     lamp is activated. Both option 

     settings will return to motion-sensor operation after the 

     continuous bright light is deactivate. 9:00 P.M. is the

     default in “Clock Time(End Time)”.

     Note: "Duration" setting will only work once per setting, 

     it automatically go into “Clock Time (End Time) on the 

     next day. Also if you do not click save for either option, 

     then the settings will follow according to the switch 

     control on the actual lamp. 

Fig.7

Use light in “Custom 

settings” mode

8. Click  Fig.4“      ” icon, 

    select “Functions”,  you can

    choose “Test”, “Auto”, or

    “Custom Setting” , which are 

    the same as the step 5,6,7. 

Fig. 8

Choose mode

Functions

Change image

Rename light

Password

Restore factory defaults

9:41 AM

100%

Setting 

Back

9. Click Fig.8 “Change image”. 

    And click “take photo” to take 

    a  photo . 

Fig.9

Set picture for light

9:41 AM

100%

Back

Take photo

Choose existing photo

Cancel

9.1 Android:Click “      ” to grasp a your desired view. 

iOS:Click “      ” to grasp a your desired view. 

iOS

Android

9.2 Android:Click “      ” to take 

      a photo. The iOs system 

      does not have this step.

       

Fig.9-1

Fig.9-2

Fig.9-1

Cancel

Summary of Contents for T0274











Reviews: