Vaxcel T0274 Assembly And Installation Instructions Manual Download Page 5

Page 5 /  10

 

160826

User Guide 

Setting for single light through mobile device (Take iOS for example as below. 

Android will be slightly different).

Before you start

 

Fig.1

2. Start the APP. 

Add a light

Fig.2

9:41 AM

100%

Bluetooth security light

Fig.3

Fig.3-1

My Dualux Lights

9:41 AM

100%

Search for Lights

Searching. Please wait.

Light List

9:41 AM

100%

Search for Lights

No light found.
- Please make sure Bluetooth on your 

  device is turned on.
- Please make sure the light is turned 

  on.

3. Click “Search for Lights” to search for existing lights.

4.If there is a light in the 

   bluetooth cover range, the 

   new light will be shown in 

   light list. Click the “Light 1”, it 

   will go to the step 5 for 

   choosing  mode. And click

   “      ” icon, it will go to the 

   step 8 .

Fig.4

Search for Lights

Light List

Light 1

9:41 AM

100%

5. Select “Test” in Manual 

    override and adjust “Detection 

    Distance” and  “Brightness” 

    as desired. Then click “Save”.

Use light in “Test” mode

Fig.5

9:41 AM

100%

Save

Back

Detection Distance

70ft

5ft

70ft

Motion Delay Time

5s

5min

5s

High Level

Low Level

Brightness

50%

100%

100%

0

50%

20%

Test
Auto
Custom Settings

Manual override

6. Select “Auto” in Manual 

    override and adjust “Motion 

    Delay Time”,  “Detection 

    Distance” and “Brightness” as 

    desired. Then click “Save”.

     

Fig.6

Use light in “Auto” mode

9:41 AM

100%

Save

Back

Test
Auto
Custom Settings

Manual override

Detection Distance

70ft

5ft

70ft

Motion Delay Time

5s

5min

5s

Low Level

Brightness

0

50%

20%

High Level

50%

100%

100%

1. Search “Dualux BT” at Apple 

    store or Android Google 

    Play. Download the “Dualux 

    BT” APP onto the device. 

 Turn on bluetooth on mobile 

    device.

● 

Turn light switch controlling 

    the light to “ON”. 

Summary of Contents for T0274











Reviews: