Page 15 / 16
150616
Alarm record bar
Camera information
bar
Language selection
■ M
anagement window
Camera information added
Select add camera here
Select add camera here
Advance Setting to WEB
■ C
ontrol window
■ P2P S
ettings
■ M
ain control interface
FAQ Changing the connected router
There are two methods to change the connected router:
1. First set the
Wifi Security Light
into “AP” mode and implement
Wifi Security Light
quick configuration.
2. Use the administrator rights to find the wireless network setting menu in the client software and modify it.
If I forgot my password:
Press and hold the RESET button in the
Wifi Security Light
panel for 10 seconds while the device is on. And all
parameters will restore to default values (factory values). The factory user name is admin and password is null.
If you face any problem, please check your network firstly
Check the status indicator of network devices (concentrator, switch and network card). If they are abnormal, check your
networking.
IP Address Error
Check the IP address of the device to see if it is in the same subnet segment with your local computer: open My
Computer > Control Panel > Network & Dial-up Connection > Local Network > Internet Protocol (TCP/IP), examine
subnet mask, IP address and gateway. When setting the IP address of the device manually, please make sure that
they are in the same subnet. Otherwise, it can not visit the device normally.
