Vaxcel F0097 Manual Download Page 8

PAGE: 8 / 10

  

    

Fig.20

Connect the white (neutral) 

wire and orange reversible 

wire from motor to the white 

(neutral) wire from the outlet 

box with a wire connector.

 

 

 

 

 

 

 

Connect the black (hot) wire 

(This is for fan control), blue wire 

(This is for light control) and 

yellow reversible wire from motor 

to the black (hot) wire from outlet 

box with a wire connector. 

 

 

 

  

 

 

 

 

Bla

Black

ck

Blue

Gr

een

White

  White

  Orange

  Yellow

Grounding

Green 

      

     

Connect three

ground wires (Green

or bare copper) coming

from outlet box, 

downrod and hanging 

bracket with a wire

connector.   

For a single swi

t

ch

Follow these s

t

eps:

 

Connect three

ground wires (Green

or bare copper) coming

from outlet box, 

downrod and hanging 

bracket with a wire

connector.   

 

Green 

Black

Black

Blue

Green

White

Orange

Yellow

Blue

 

(light)

White

Grounding

Connect the black (hot) wire 

(This is for fan control) and 

yellow reversible wire from 

motor to the black (hot) wire 

from outlet box with a wire 

connector.

 

 

Connect the white (neutral) 

wire and orange reversible 

wire from motor to the white 

(neutral) wire from the outlet 

box with a wire connector. 

 

 

Connect the blue wire (This 

is for light control) from motor 

to the blue wire from outlet box 

with a w ire connector.

  

*** The wire connection points should be turned 

      upward and pushed carefully up into outlet box.

 

     
    
     

      
     

Fig.22

Turn ON the electric circuit at the main fuse or circuit breaker box. 

For dual switches

Follow these steps:

*** After making the wire connections, the wires should

     be spread apart. The white (neutral) conductor from

     motor and outlet box, orange conductor from motor

     with green (grounding) conductor on one side; the

     black (hot) and blue conductor from motor and outlet

     box with the black, blue, yellow conductor from motor

     on the other side of the outlet box.

Fig.21

*** After making the wire connections, the wires should

     be spread apart. The white (neutral) conductor from

     motor and outlet box, orange conductor from motor

     with green (grounding) conductor on one side; the

     black (hot) conductor from motor and outlet box 

     with the black, blue, yellow conductor from motor 

     on the other side of the outlet box.

*** The wire connection points should be turned upward 

     and pushed carefully up into outlet box.

230209

Summary of Contents for F0097











Reviews: