PAGE: 6 / 10
2
Fan Motor
Assembly
3
Light Kit with LED Module
Fix Screw
4
Light Kit with
LED Module
5
Canopy Screw
Canopy
Decorative Cap
Hanger Bracket
Slide the canopy up to ceiling and over the two
canopy screws on hanger bracket. Rotate
canopy clockwise, next, while holding the
canopy with one hand, slide the decorative
cap over the screws and rotate clockwise until tight.
Note: Adjust the canopy screws as necessary
until the canopy and decorative cap are snug.
Remove three fix screws from fan motor assembly first. Then
connect the white (neutral) wire from the light kit to white (neutral)
wire from fan motor assembly with a wire connector; connect the
black (hot) wire from light kit to blue (hot) wire from fan motor
assembly with a wire connector. Carefully put the wires into the
bottom of fan motor assembly, then attach the light kit onto the
connect plate of light kit with previous three fix screws.
230209