PAGE: 4 / 10
IMPORTANT:
BEFORE YOU BEGIN INSTALLATION, CAREFULLY READ ALL INFORMATION PROVIDED IN THE SAFETY
INSTRUCTIONS AND INSTALLATION INSTRUCTIONS. IF IN DOUBT, CONSULT A QUALIFIED
ELECTRICIAN.
SAVE ALL INSTRUCTIONS.
Tighten the two collar screws.
Slide lock pin in to hanger pin until
it is locked into position.
Remove the lock pin from the
hanger pin and remove the
hanger pin from the downrod.
Turn OFF the electric circuit at
the main fuse or circuit breaker
box.
Thread the motor wires through
the canopy, decorative cap (Making
sure the smooth side of decorative
cap is facing downward), downrod
stand cover and downrod.
Loosen the collar screws out part way.
Insert the downrod into the collar.
Slide hanger pin through holes of
collar and downrod.
Hang the fan on hanger bracket, and
make sure the slot of hanger ball is
snapped into the chip of hanger bracket
exactly.
Note: For sloped ceiling installation,
make sure the slot of hanger ball and
the chip of hanger bracket face down.
Tighten the hanger bracket to the outlet box with two mounting screws.(
Make sure
the outlet box is securely installed so that it will be able to support at least the
fan weight.
) Attach the safety cable hook to the ceiling with the drywall screw and
washer, and make sure the safety cable hook is covered by the fan canopy.
WARNING: MOUNT ONLY TO AN OUTLET BOX MARKED "ACCEPTABLE FOR
FAN SUPPORT"!
Washer
Safety Cable Hook
Drywall Screw
Ceiling
Hanger Bracket
Ceiling Joist
Wood Member
(2" x 4" Approx.)
Junction Box
Ceiling
Hanger Bracket
Ceiling Joist
Wood Member
(2" x 4" Approx.)
Junction Box
Canopy
Decorative Cap
Downrod Stand
Cover
Downrod Stand
Cover
Motor
Wires
Downrod
Collar
Canopy
Decorative Cap
Motor
Wires
Downrod
Hanger Pin
Collar Screw
Collar
Lock Pin
Collar Screw
Fig.2
Downrod
230209