7
user guide
belt & brush bar removal & replacement
6. Belt or Brush Bar:
Removal & Replacement
Tool required: Phillips Screwdriver
WARNING:
To reduce the risk of injury from moving
parts - uplug before servicing.
To Remove New Belt
Turn cleaner over. Base should lay flat and face up. To
remove nozzle guard, remove two (2) screws near rollers
(Fig.6/1).
Release the nozzle guard by pulling tab toward the front of
the cleaner and rotate/pivot the nozzle guard up to lift off
(Fig.6/2).
Be sure belt is off motor shaft. Lift and remove brush bar.
Dispose of old belt (Fig.6/3).
!
Fig.6/1
TAB
Fig.6/2
Fig.6/3
Vax VCU-02 User Guide.qxd 6/3/07 13:58 Page 7
