Vax
VCU-02
10
troubleshooting
8. Troubleshooting
WARNING: To reduce the risk of personal injury,
unplug the vacuum cleaner before servicing.
PROBLEM: Vacuum cleaner won't run
Cause:
Not properly plugged into electrical outlet.
Solution:
Plug unit in firmly.
Cause:
Cord Extension Connector and Power
Cord not fully connected or
unconnected completely.
Solution:
Firmly push cords together until they are
fully connected.
Cause:
Blown fuse or tripped breaker.
Solution:
Check fuse or breaker in home. Replace fuse /
reset breaker.
Cause:
Needs service.
Solution:
Take to service centre
or call 0870 1129 145.
PROBLEM: Cleaner won’t pick up/loss of suction.
Cause:
Paper bag not installed correctly.
Solution:
Review paper bag removal and
replacement - p6.
Cause:
Paper bag is full.
Solution:
Remove/replace paper bag - p6.
Cause:
Brushroll worn.
Solution:
Replace brushroll - p8.
Cause:
Broken or worn belt.
Solution:
Replace belt - p8.
PROBLEM: Dust escaping from the vacuum cleaner.
Cause:
Paper bag is full.
Solution:
Replace paper bag - p6.
Cause:
Paper bag is not installed correctly.
Solution:
Review paper bag removal and
replacement - p6.
9. UK Service & Help
Vax Care 0870 1129 145
(UK only)
Monday-Friday 9.00am to 5.00pm.
An answerphone is available outside of these hours. Any
queries or concerns about using the Vax, call the Vax
Careline. Calls are charged at the UK national rate.
Please make a note of the serial number and model
number of the vacuum cleaner before calling. There are
over 400 approved Vax Service Agents in the UK. For the
nearest Service Agent, please call the Vax Careline.
www.vax.co.uk
!
Vax VCU-02 User Guide.qxd 6/3/07 13:58 Page 10
