6
Vax Service line
AU: 1300 361 505 / NZ: 0800 800 900
Operation
Carpet Height Adjustment
Settings
Agitator Brush Roll Shut-Off
Cleaning Tools
The cleaning of carpet and rugs takes place at the nozzle (
A
). When it is
necessary to raise and lower the nozzle for various carpet pile heights,
turn the nozzle control knob (
B
) to the desired setting.
For maximum cleaning performance, the following carpet height settings
are recommended:
• Lowest setting: for all types of carpet.
Note:
If the cleaner is diffi cult to push, turn knob to the next higher setting.
• Higher settings: for very deep pile carpet, where easier pushing effort is
desired, while maintaining good cleaning performance.
The agitator brush roll shuts off automatically for tool use, when the cleaner
is in the upright position.
To manually shut off the agitator brush roll for cleaning hard fl oors, step on
the pedal (
A
). The indicator (
B
) will show red in the “brush roll off” window.
To turn the agitator brush roll on, step on the pedal again. The indicator will
show red in the “brush roll on” window.
Tools allow for cleaning surfaces above the fl oor and for reaching hard to clean areas.
The cleaner is ready for tool use when handle is in upright position.
The agitator brush roll will not rotate when the cleaner is in the upright position or the if the agitator brush
roll shut off indicator is in the OFF position when the handle is lowered.
IMPORTANT:
Turn brush bar off when cleaning hard fl oors.
B
A
A
B
