9
www.vax.com.au
Maintenance
Disconnect cleaner from electrical outlet. Do not use cleaner without dust bin or fi lters in place.
Disconnect cleaner from electrical outlet. Do not use cleaner without dirt cup or fi lters in place.
Twist fi lter assembly (
A
) counterclockwise.
Remove assembly from dust bin.
Remove dust bin.
With thumb and forefi nger, slide latch (
A
) located at the top of the
housing to the right and pull down to remove grey fi lter frame.
Remove black foam fi lter. Rinse fi lter frame cartridge and foam fi lter
under cold water.
Allow both fi lter frame and fi lter to air dry for 24 hours before
replacing fi lter into fi lter frame. Reposition fi lter frame cartridge by
inserting tabs into slots on back of housing. Rotate fi lter cartridge
frame up toward top of housing and snap closed.
Dirt and debris can be cleaned from the fi lter assembly
by brushing with the cleaner’s combination tool.
Place the fi lter assembly on the dust bin, aligning (3)
tabs (
A
) on fi lter with (3) slots on dust bin (
B
) and twist
it clockwise to secure into position. Press dirt cup door
release button (
C
) to latch dust bin door closed.
Replace dust bin.
A
A
A
B
C
Filters
Cyclonic Filter Assembly: How to Clean
Filters
Secondary Filter: How to Clean
