Vax Edge Pet & Car CLUP-EGKS, User Manual

Page: 8 / 22

6
Getting started
HARD
FLOOR
CARPET
Slide the battery into the machine until it
clicks into place.
Press the boost button to increase the
suction for particulary dirty areas.
When the machine is in use the battery
level indicator lights will illuminate
indicating how much charge is
remaining. When less than 20% charge
is remaining the bottom light will flash
red indicating the battery is running low
and charging is required.
Place a foot on the floorhead and pull the
handle backwards to recline it.
Press the on/off button to switch the
machine on.
CAUTION: If the brushes have been obstructed, the motor protection sensor may
activate. The brushbar and brushroll will stop and the light on the floorhead will
illuminate red. Switch off the machine, clear any obstruction and wait 1 minute
before reactivating.
Operation
NOTE: For best performance the brushbars should be set to the correct mode for carpets and hard
floors. Constant use of the boost mode and brushbars will reduce the battery runtime.
Press the
HARD FLOOR
or
CARPET
button to select flooring mode. Brushes
can be switched OFF For delicate floors
and flooring not suitable for use with a
rotating brushbar.
CAUTION: The brushbar and brushroll in the floorhead and the brushbar in the mini motorised pet
tool constantly rotates when activated. Never use on one spot for any prolonged period of time as this
may damage the floor surface. To prevent any damage being sustained test on an inconspicuous area
of the flooring first.