14
Cleaning and maintenance
Use a damp cloth to remove any
dirt/debris from the brushroll. Allow the
brushroll to fully dry before assembling
back into the floorhead. DO NOT wash
or over saturate the brushroll.
Check the floorhead inlet for any
blockages and use a blunt object to
remove the blockage.
Clear any dirt/debris inside the
brush housing.
Refit the end cap onto the brushroll.
With the lock in the unlocked position
slot the brushroll into the right side of
the floorhead first and push the end
cap into place.
Using a coin, turn the brushroll cover
clockwise. The cover will sit flush to the
floorhead when locked into place.
Pull to remove the end cap and
slide any hair and threads off the
end of the brushroll.
Using a coin, push and turn the
brushroll cover to the unlock symbol.
NOTE: The brushroll cover cannot
be removed.
Hold the tab and pull away the
brushroll from the brush housing.
Removing and cleaning the floorhead brushroll
Summary of Contents for Edge Pet & Car CLUP-EGKS
Page 1: ...CLUP EGKS CLUP EGBC User Guide VAX Edge Pet Car Cordless Vacuum...
Page 20: ...18 Notes...
Page 21: ...19 Notes...
