16
5. The first person:
Hold the Unibody as shown in fig. 20. Place the Unibody with the upper duct pipe
and lower duct pipe in the wall. See fig. 21.
CAUTION
Hold the Unibody till it’s mounted with the four 6 x 120 screws.
fig. 20 Hold the Unibody as shown in this
figure
fig. 21 Place the Unibody on the wall
6. The second person:
Mount the 6 x 120 screws in each corner of the Unibody (4 ×). Use a screw driver.
CAUTION
The ducts and the holes must have an air tight seal. To establish this, it’s critical that all
four screws are properly functioning. Make sure the fresh-r
®
is pushed firmly to the wall
when attaching it.
NOTICE
When you are installing the
fesh-r everywhere
®
, now use the extract ducts to make a
connection to your in-house ventilation system. See for more information Appendix 15.2.
Summary of Contents for fresh-r everywhere On-The-Wall
