14
5 Mount the Unibody on the wall
1.
Remove the four corner bolts (don’t remove the middle bolts).
fig. 16 Remove the four corner bolts
2. Put expanding foam around the edge of both EPP covers. Make sure the expanding
foam insulate the whole edge of the EPP covers in order to prevent air leaking
(regarding the inner wall).
fig. 17 Put expanding foam around the edge of both EPP covers.
3. Place the Unibody in vertical position and open the door as far as possible.
4. Press the two storm flap levers to ensure they are open.
DON’T remove the
two middle bolts
Remove the four
corner bolts
Summary of Contents for fresh-r everywhere On-The-Wall
