Driving and operating
171
2. Release selector lever trim from
centre console at rear, fold
upwards and rotate to the left.
3. Insert the special tool into the
opening as far as it will go and
move the selector lever out of P or
N. If P or N is engaged again, the
selector lever will be locked in
position again. Have the cause of
the power supply interruption
remedied by a workshop.
4. Mount the selector lever trim on
the centre console and refit.
Manual transmission
To engage reverse, with the vehicle
stationary press the release button on
the selector lever and engage the
gear.
If the gear does not engage, set the
lever to neutral, release the clutch
pedal and depress again; then repeat
gear selection.
Do not slip the clutch unnecessarily.
When operating, depress the clutch
pedal completely. Do not use the
pedal as a foot rest.
Summary of Contents for Insignia
