Vauxhall Antara, Infotainment Manual

Page: 42 / 137

Navigation 41
In the 2D map view, you can toggle
between the "north orientation",
and the "driving direction
orientation" mode, see Map
orientation below.
In the 3D map view, only the
"driving direction orientation" mode
is available.
■ Map orientation: toggles the 2D
map view between the "north
orientation" (north-up) mode and
the "driving direction orientation"
(head-up) mode.
In the head-up mode, the map
rotates depending on the driving
direction of the vehicle.
■ Auto Zoom: if set to On, the map
scale will be adjusted (zoom in/out)
automatically by the navigation
system to ensure reliable route
guidance.
■ Show POIs In Map: if set to On,
points of interest, e.g. fuel stations,
parking areas, or restaurants, are
indicated by corresponding
symbols on the map.
■ Map Data Information: displays the
name and version of the map data
stored on the inserted SD card.
Setting up the navigation
system
To open the NAVIGATION SETUP
menu: press the SETUP button, and
then select the Navigation menu item.
The following settings/options are
available:
■ Map Setup: displays the MAP
SETUP menu, see "Setting up the
map display" above.
■ Voice Guidance: if set to On, voice
commands (e.g. remaining
distance to next turning, turning
direction) are announced during
route guidance.
■ Voice Vol.: if voice guidance is
activated (see above), change this
setting to adjust the volume of voice
commands. After each change an
audible feedback is given.
■ Position Information: displays the
address/GPS coordinates of the
current position.
To store the displayed address/
GPS coordinates in the address
book: select the Save screen
button.