manualshive.com logo in svg

Vauxhall Antara, Infotainment Manual

Share
Download
Vauxhall Antara Infotainment Manual Download Page 31

30

USB port

At least 8 folders in depth hierarchy

are supported.
WMA files with Digital Rights

Management (DRM) from online

music shops cannot be played.
WMA files can only be played back

safely, if they were created with

Windows Media Player version 9 or

later.
Applicable playlist

extensions: .m3u, .pls, .wpl.
Playlist entries must be in the form

of relative paths.
The system attribute for folders/

files that contain audio data must

not be set.

Playing saved audio files

MP3 player, USB drive, SD card

Press the MEDIA button once or

several times to activate the audio

USB mode.
Replay of the audio data stored on the

USB device is started.
The operation of audio data sources

connected via USB is the same as

described for an audio MP3/WMA CD

3

 24.

iPod

Press the MEDIA button once or

several times to activate the iPod

mode.
Replay of the audio data stored on the

iPod is started.
The operation of the iPod connected

via USB is mainly the same as

described for an audio MP3/WMA CD

3

 24.

Below only the aspects of operation

that are different/additional are

described.

Summary of Contents for Antara










































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands