manualshive.com logo in svg

Vauxhall Antara, Infotainment Manual

Share
Download
Vauxhall Antara Infotainment Manual Download Page 30

USB port

29

USB port

General information ..................... 29
Playing saved audio files ............. 30

General information

In the centre console there is an USB

socket for the connection of external

audio data sources.

Notice

The socket must always be kept

clean and dry.

An MP3 player, USB drive, SD card

(via USB connector/adapter), or iPod

can be connected to the USB port.
When connected to the USB port,

various functions of the above

devices can be operated via the

controls and menus of the

Infotainment system.

Notice

Not all MP3 player, USB drive, SD

card or iPod models are supported

by the Infotainment system.

Important information

■ The external devices connected to

the USB port must comply with the

USB Mass Storage Class

specification (USB MSC).

■ Devices connected via USB are

supported according to USB

Specification V 2.0. Maximum

supported speed: 12 Mbit/s.

■ Only devices with a FAT16/FAT32

file system are supported.

■ Hard disk drives (HDD) are not

supported.

■ USB hubs are not supported.
■ The following file formats can be

used:
ISO9660 Level 1, Level 2, (Romeo,

Joliet).
MP3 and WMA files written in any

format other than listed above may

not play correctly, and their file

names and folder names may not

be displayed correctly.

■ The following restrictions apply for

the data stored on external devices

connected to the USB port:
Maximum folder/playlist number:

5000.
Maximum file/song number: 15000.
Maximum file/song number per

folder/playlist: 6000.

Summary of Contents for Antara










































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands