Vauxhall Antara Infotainment Manual Download Page 106

Page: 106 / 137

Radio

105

Programme type selection

1. Press the SETTINGS button.
2. Press OK until PTY is displayed.
3. Select one of the 29 programme

types e.g. News or

Entertainment with

4. Hold down the OK button until the

station search begins.

After station search starts the radio

display appears.
If the radio does not find an

appropriate station, it plays the

station to which the radio was most

recently tuned.

Regional programmes

Some RDS stations transmit different

regional programmes over different

frequencies at certain times.

Switching on regionalisation

The RDS function must be switched

on.
Press the REG button briefly.
REG is shown on the display.

Automatic regionalisation

Press the REG button for a few

seconds.
REG Auto On appears on the display

and then the display shows REG.
During the search for the frequency

with the best reception, the radio

stays with the regional programme it

is tuned to until the reception signal

becomes too weak. Then it switches

to a different regional programme.
Press the REG button again for a few

seconds.
REG Auto Off appears on the display

and then the display shows REG.
During the search for the frequency

with the best reception, the radio

stays with the regional programme it

is tuned to.

Switching off regionalisation

Press the REG button briefly again.
REG is no longer shown on the

display.
The radio allows switching to another

regional programme.

Traffic programme (TP)

Traffic programme stations are FM

RDS stations which broadcast traffic

news.
Traffic stations can be recognised by

the TP symbol in the display.

Switching traffic programme on/off

■ If radio traffic announcement is

enabled, [TP] or [ ] is displayed.

■ If the current station is a traffic

programme station, [TP] appears in

the display.

■ If the current station is a not traffic

programme station, the radio will

automatically search for the traffic

station with the best reception.
[ ] does not appear on the display.
Press the TP button to switch on

TP.
[ ] is displayed.

■ The automatic station search

feature searches only for traffic

announcements.

■ During automatic search or if

reception of a traffic programme is

not possible, [ ] is displayed.

Summary of Contents for Antara










































































































































Search results

Summary of Contents for Antara

Reviews:

Related manuals for Antara

Brands by name

Popular brands

Vauxhall Antara, Infotainment Manual

Search results

Summary of Contents for Antara

Reviews:

Related manuals for Antara

Brands by name

Popular brands