Instruments and controls
81
The Power Flow screens indicate the
current system operating condition.
The screens show the energy flow
between the engine, electric drive unit
and high voltage battery. These
components will be highlighted when
they are active.
Charging
There are different settings for charge
mode selection, charge level
selection and charge rate selection.
Charging
3
129
Energy information
To view the Energy Usage, Energy
Efficiency and Efficiency Tips, press
8
on the instrument panel and then
press Energy Info.
Energy Usage
This screen displays information for
the total of all the drive cycles since
the last time the high voltage battery
was fully charged. This includes
distance travelled in electric mode,
distance travelled in extended range
mode, total distance travelled, electric
energy used from the battery, total
fuel used and average fuel economy.
There are maximum limits to some of
the values displayed. These values
are replaced with dashes, if the value
limits have been reached. To reset
these values, the high voltage battery
will need to be fully recharged. The
circle graph also represents the
percentage of distance travelled
using electric mode versus extended
range mode. The lifetime fuel
economy is a total over the life of the
vehicle. It can only be reset by a
workshop.
Energy usage information will also
appear automatically on power off
when the retained power off is active.
This automatic pop-up can be
disabled in the vehicle
personalisation.
Vehicle personalisation
3
83.
