Vauxhall 2012 Astra Owner'S Manual Download Page 48

Page: 48 / 225

Seats, restraints

Ensure that the child restraint system

to be installed is compatible with the

vehicle type.
Ensure that the mounting location of

the child restraint system within the

vehicle is correct.
Allow children to enter and exit the

vehicle only on the side facing away

from the traffic.
When the child restraint system is not

in use, secure the seat with a seat belt

or remove it from the vehicle.

Note

Do not stick anything on the child

restraint systems and do not cover

them with any other materials.
A child restraint system which has

been subjected to stress in an

accident must be replaced.

Summary of Contents for 2012 Astra


































































































































































































































Search results

Summary of Contents for 2012 Astra

Reviews:

Related manuals for 2012 Astra

Brands by name

Popular brands

Vauxhall 2012 Astra, Owner'S Manual

Search results

Summary of Contents for 2012 Astra

Reviews:

Related manuals for 2012 Astra

Brands by name

Popular brands