Vauxhall 2012 Astra Owner'S Manual Download Page 35

Page: 35 / 225

Seats, restraints

Horizontal adjustment

To adjust horizontally, pull the head

restraint forwards. It engages in

several positions.
To return to its rearmost position, pull

fully forwards and release.

Head restraints on rear seats

Height adjustment

Pull the head restraint upwards or

press the catch to release and push

the head restraint downwards.

Removal

Press both catches, pull the head

restraint upwards and remove.

Active head restraints

In the event of a rear-end impact, the

front parts of the active head

restraints are moved slightly

forwards. Thus the head is supported

so that the risk of whiplash injury is

reduced.

Note

Approved accessories may only be

attached if the seat is not in use.

Summary of Contents for 2012 Astra


































































































































































































































Search results

Summary of Contents for 2012 Astra

Reviews:

Related manuals for 2012 Astra

Brands by name

Popular brands

Vauxhall 2012 Astra, Owner'S Manual

Search results

Summary of Contents for 2012 Astra

Reviews:

Related manuals for 2012 Astra

Brands by name

Popular brands