Vauxhall 2012 Astra Owner'S Manual Download Page 155

Page: 155 / 225

154

Driving and operating

■ The coupling ball bar must be firmly

engaged in the opening.

■ The coupling ball bar must be

locked and the key removed.

Warning

Towing a trailer is permitted only

when a coupling ball bar is fitted

correctly. If the coupling ball bar

does not engage correctly, seek

the assistance of a workshop.

Dismounting the coupling ball

bar

Open the protective flap and turn the

key to position

to unlock the

coupling ball bar.
Pull out rotary handle and turn

clockwise as far as it will go. Pull out

coupling ball bar downwards.
Insert sealing plug in opening. Fold

away socket.

Trailer stability assist

If the system detects snaking

movements, engine power is reduced

and the vehicle/trailer combination is

selectively braked until the snaking

ceases. While system is working keep

steering wheel as still as possible.
Trailer stability assist (TSA) is

a function of the Electronic Stability

Control

134.

Summary of Contents for 2012 Astra


































































































































































































































Search results

Summary of Contents for 2012 Astra

Reviews:

Related manuals for 2012 Astra

Brands by name

Popular brands

Vauxhall 2012 Astra, Owner'S Manual

Search results

Summary of Contents for 2012 Astra

Reviews:

Related manuals for 2012 Astra

Brands by name

Popular brands