Vauxhall 2012 Astra Owner'S Manual Download Page 116

Page: 116 / 225

Climate control

115

Each change of settings is shown in

the Info-Display for a few seconds.
The electronic climate control system

is only fully operational when the

engine is running.

Automatic mode AUTO

Basic setting for maximum comfort:

■ Press AUTO button: the air

distribution and fan speed are

regulated automatically.

■ Open all air vents.
■ Press

to switch on cooling. On

some versions cooling is activated

automatically by pressing the

AUTO button.

■ Set the preselected temperatures

for driver and front passenger using

the left and right rotary knobs to

22 °C.

The fan speed regulation in automatic

mode can be changed in the menu

Settings.
Vehicle personalisation

93.

All air vents are actuated

automatically in automatic mode. The

air vents should therefore always be

open.

Temperature preselection

Temperatures can be set to the

desired value.

If the minimum temperature is set, the

climate control system runs at

maximum cooling.

Summary of Contents for 2012 Astra


































































































































































































































Search results

Summary of Contents for 2012 Astra

Reviews:

Related manuals for 2012 Astra

Brands by name

Popular brands

Vauxhall 2012 Astra, Owner'S Manual

Search results

Summary of Contents for 2012 Astra

Reviews:

Related manuals for 2012 Astra

Brands by name

Popular brands