Vauxhall 1994 Omega Owner'S Manual Download

Page: 54 / 244

Radio rem ote control

The rad io remote control is integrated in

the k ey.
Used to op erate:

central locking system,

mechanical anti-theft locking system ,

boot lid (Saloon),

Vauxhall ala rm system

It is also possible to close the windows and
sun roof

using the remote control unit.

The remote control has a range of approx.
3 metres. The range ma y b e reduced owing

to sha dowing and reflection of the radio
wav es. To opera te the remote control,

point it at the vehicle.

For your conv enience, we recommend that
the central lock ing system always be

op erated using the remote control unit.
Handle remote control with care, protect

from moisture and high temperatures and
avoid unnecessary operation.
The light-emitting diode (LED) in the
remote control unit lights up and the

ha zard w arning lamps flash briefly to show
that the rem ote control is op erational.

Centra l locking system,

see page 54.

Mechanic al anti-theft locking system,

see page 55.

Locking the boot lid /tailga te

see page 56.

Vauxhall ala rm system

see page 59.

Summary of Contents for 1994 Omega





















































































































































































































































Search results

Summary of Contents for 1994 Omega

Reviews:

Related manuals for 1994 Omega

Brands by name

Popular brands

Vauxhall 1994 Omega, Owner'S Manual

Search results

Summary of Contents for 1994 Omega

Reviews:

Related manuals for 1994 Omega

Brands by name

Popular brands