Vaughn Featherweight Series, Operation And Installation Manual

Page: 9 / 31

8

Open highest hot water faucet.
 Open cold water inlet valve and fill system.
G. WIRING

TANK MUST BE FULL OF WATER BEFORE POWER IS
ON.

Separate fused branch circuit (refer to local codes).
 Mark the electrical shut off for future reference.
 Wiring diagram (See WIRING DIAGRAM 1)

Aluminum conductors.
 Check to see that voltage on rating plate and supply agree.
 CAUTION: Unit must be properly grounded.
H. INSTALLATION COMPLETED AND CHECKLIST
FILLED OUT
BY: ________________________________________________
DATE: ______________________________________________
SPECIAL NOTE: Test of hot water after installation is
necessary to be sure temperature controls are working
properly. (See WATER TEMPERATURE REGULATION)