Vaughn Featherweight Series, Operation And Installation Manual

Page: 24 / 31

23

To set the unit back to factory defaults, in the edit mode
press the
or buttons to alternate between cancelling the
operation, “no”, or resetting to default, “YES”.
M. DEGREES

The degrees option provides the user with the ability to
switch between standard and metric temperature readings.
The “dEgF” choice will set the temperatures to be displayed
in Fahrenheit, and the “dEgC” choice will set the
temperatures to be displayed in Celsius.

To change the display units, in the edit mode press the or
buttons to alternate between degrees Fahre
nheit, “dEgF”,
or degrees Celsius, “dEgC”. To set the change, let the
display timeout after 5 seconds, press the
button, or press
the button.
N. DISABLE ERRORS

The disable errors option allows for the use of external timer
controllers to inhibit operation of the elements during certain
times without removing power to the controller or otherwise
affecting operation. The top and bottom element errors can
be chosen individually to be turned on or off. If no external
control is used, these errors should remain enabled.