12
o
Ensure the bolt is facing forward and slide through
hole.
o
Hold the clamp together with one hand and tighten
nut with the other hand. (See FIGURE 2)
o
Tighten to 15 ft.-lbs.
NOTE: Be sure that clamp is installed level.
WARNING: Plastic O-ring housing must be installed properly
(See FIGURE 2) to prevent leaking. Failure to do this will void
the warranty. Must use new O-rings if replaced or removed.
Summary of Contents for Featherweight Series
Page 15: ...14 WIRING DIAGRAM 1 ...
Page 16: ...15 FIGURE 1 ...
Page 17: ...16 FIGURE 2 ...
Page 27: ...26 REPLACEMENT PARTS ...
