Vaughn Featherweight Series, Operation And Installation Manual

Page: 12 / 31

11
port on the left side of the electronic controller.
These are not USB compatible connections. The V-
Grid AU can be powered from the included DC
power supply with output rated 12V, 0.5 Amps. The
power supply is not required when connected to a
control that has power.
 V-Grid Activation Status Indicator
o
Red
– Device locked
o
Green
– Device Unlocked
o
Blinking Red
– Not connected, trying to connect.
o
Blinking Green
– Status change is in progress.

WIFI Status Indicator
o
Red LED on, not blinking: Power is on.
o
Green LED on, not blinking: The device is linked to
the factory servers.
o
Green LED blinking once per second: The device is
communicating with the factory servers.
D. INSTALLING THE REMOVABLE ELEMENT ASSEMBLY
 Element Assembly is installed at the factory. The following is
provided for servicing or removing the Element Assembly.

Insert Element Assembly with plastic O-ring housing and
align top fittings so the Top Element (Red Wires) faces
forward.

WARNING: Plastic O-ring housing must be properly
installed. (See FIGURE 2) Failure to do this will void the
warranty.
 Install and secure the clamp and nut in the following manner:
o
Place the clamp around the flange and coil plate.